Mục tiêu của chúng tôi là tuân thủ và liên tục cải thiện các tiêu chuẩn cao về đổi mới, sản xuất và sự hài lòng về sản phẩm và dịch vụ mà chúng tôi đã duy trì trong 65 năm. Chọn từ nguyên liệu thô để đóng gói để đảm bảo chất lượng cao nhất của sản phẩm.
JET-LUBE EZY-Open:tm

JET-LUBE EZY-Open:tm:是渗透氧化皮,铁锈,腐蚀和氧化的老硬化阀的润滑剂,可以禁用或使阀门操作极其困难。JET-LUBE EZY-Open:tm:是由一组选定的能够软化或溶解阀门润滑剂和密封剂,残留的胶,漆,结垢和腐蚀存款不可燃,无毒,可生物降解的液体特殊配方软凝胶。应用JET-LUBE EZY-Open:tm:是渗透和润滑禁用或难以操作润滑阀门。非常适合使用在任何注射组件拆卸以帮助。

JET-LUBE EZY-Open:tm: Valve Penetrant is designed to penetrate scale, rust, corrosion and old oxidized hardened valve lubricants which can disable or make valves extremely difficult to operate. JET-LUBE EZY-Open:tm: is a soft gel specifically formulated from a select group of nonflammable, nontoxic and biodegradable fluids capable of softening or dissolving valve lubricants and sealants, residual gums, lacquer, scale and corrosion deposits. Applications JET-LUBE EZY-Open:tm: Valve Penetrant is designed to penetrate and lubricate disabled or hard to operate lubricated valves. Excellent for use in any injectable assembly to aid in disassembly.

JET-LUBE EZY-Pak:tm: #125

可泵送用高压注油器,JET-LUBE EZY-Pak:tm: #125将符合任何形状,防止泄漏和/或异物进入阀腔。优异的耐水性允许使用的蒸汽应用。耐烃类。应用JET-LUBE EZY-Pak:tm: #125是专为提供极寒条件下灵活的包装。油田:建议在北极条件阀和井口使用。工业和海洋:建议在任何需要的水或烃阻力在低或中等温度的应用程序使用。它是特别有效的水,盐水和含水溶液。

Pumpable with a high pressure lubricator, JET-LUBE EZY-Pak:tm: #125 will conform to any shape, preventing leaks and/or foreign materials from entering the valve cavity. Excellent water resistance allows use for steam applications. Resistant to hydrocarbons.  Applications JET-LUBE EZY-Pak:tm: #125 is specifically designed to provide a flexible packing under arctic conditions. Oilfield: Recommended for valve and wellhead use in arctic conditions. Industrial and Marine: Recommended for use in any application requiring water or hydrocarbon resistance at low or moderate temperatures. It is particularly effective in water, brine and aqueous solutions.

JET-LUBE EZY-Pak:tm: #120

JET-LUBE EZY-Pak:tm: #120被配制与烃耐植物油,聚合物,惰性填料和高温纤维混合,以产生一种团状填料化合物。JET-LUBE EZY-Pak:tm: #120是我们最经济的可注射填充化合物。最好是通过注射阀1/8“或更大口径抽水,但也可以通过巨大的圆头配件泵(带更多的努力)。应用JET-LUBE EZY-Pak:tm: #120可以在任何油田,工业或海洋应用中使用其中一种注射填充需要填补内部空隙,它是烃类和防水,并提供优良的密封性能,当注入阀阀盖,填料箱,并要求包装等领域。

JET-LUBE EZY-Pak:tm: #120 is formulated with hydrocarbon resistant vegetable oils, polymers, inert fillers and high temperature fibers blended to produce a dough-like packing compound. JET-LUBE EZY-Pak:tm: #120 is our most economical injectable packing compound. It is best pumped through an injection valve with a 1/8" or larger bore, but can also be pumped (with more effort) through giant buttonhead fittings.  Applications JET-LUBE EZY-Pak:tm: #120 can be used in any oilfield, industrial or marine application in which an injectable packing is desired to fill an internal void. It is hydrocarbon and water resistant and provides excellent sealing capability when injected into valve bonnets, stuffing boxes, and other areas requiring packing.

JET-LUBE EZY-Pak:tm: #115

JET-LUBE EZY-Pak:tm: #115可使用高压润滑器被泵送,或者可以通过手形成任何空隙,需要一个密封化合物。应用JET-LUBE EZY-Pak:tm: #115:一种可注射的填料,可以泵入阀的阀杆密封或可用手来形成并压成任何需要的包装区。工业和海洋:一个易于使用的复合包装对于任何工业或船用申请,要求无泄漏密封。

JET-LUBE EZY-Pak:tm: #115 can be pumped using a high pressure lubricator, or may be formed by hand into any void requiring a packing compound. Applications JET-LUBE EZY-Pak:tm: #115: An injectable packing that can be pumped into the stem gland of valves or can be formed by hand and pressed into any area requiring packing. Industrial and Marine: An easy to use packing compound for any industrial or marine application requiring a leak-free seal.

JET-LUBE EZY-Pak:tm: #100

JET-LUBE EZY-Pak:tm: #100包装复合将符合任何形状,形成了一个垫片或填料密封。注射压力下,化合物将激活一个密封。应用JET-LUBE EZY-Pak:tm: #100是非常适合那些需要一个聚四氟乙烯垫片或填料的耐化学性的任何应用程序。它的配方用最少的粘结剂,提供了一个几乎纯聚四氟乙烯垫片或密封胶。

JET-LUBE EZY-PAK #100 Packing Compound will conform to any shape, forming a gasket or packing seal. Injection of compound under pressure will activate a seal. Applications JET-LUBE EZY-Pak:tm: #100 is ideal for any application where the chemical resistance of a PTFE gasket or packing is required. It is formulated with a minimum of binder, providing an almost pure PTFE gasket or sealant.

JET-LUBE EZY-Turn:tm: #22

JET-LUBE EZY-Turn:tm: #22提供最佳的密封性,润滑性和扭矩降低而被碳氢化合物和防水。它是利用高压油雾容易可注射进入阀体。应用油田:JET-LUBE EZY-Turn:tm: #22已经制定了在油田生产情况(圣诞树,线路阀)可以在那里遇到了各种各样的服务条件下使用。这是一个优质的产品,并应采用硬性的“花生酱”型密封胶固体填料不想要的。它是理想的气态服务的使用。工业和海洋:JET-LUBE EZY-Turn:tm: #22也推荐用于需要耐烃或烃/水混合物闸阀的应用。

JET-LUBE EZY-Turn:tm: #22 provides optimum sealability, lubricity and torque reduction while being hydrocarbon and water resistant. It is easily injectable into the valve body using a high pressure lubricator.  Applications Oilfield: JET-LUBE EZY-Turn:tm: #22 has been formulated for use in production oilfield situations (Christmas trees, line valves) where a variety of service conditions may be encountered. This is a premium product and should be used where solid fillers mandated in the 'peanut butter' type sealants are not wanted. It is ideal for use in gaseous services.  Industrial and Marine: JET-LUBE EZY-Turn:tm: #22 is also recommended for gate valve applications requiring resistance to hydrocarbon or hydrocarbon/water mixtures.

JET-LUBE EZY-Turn:tm: #14

JET-LUBE EZY-Turn:tm: #14闸阀密封及阀体填料润滑油是基于“花生酱”润滑剂专为WKM并在低温和高温极端其中植物油型产品将无法经营类似闸阀使用优质合成。应用的JET-LUBE EZY-Turn:tm: #14应该在外面喷射润滑油的JET-LUBE EZY-Turn:tm: #14,其中一个耐烃产品所需要的温度范围内的应用。

JET-LUBE EZY-Turn:tm: #14Gate Valve Sealant & Body Filler Lubricant is a premium synthetic based 'peanut butter' type lubricant designed for use with WKM and similar gate valves operating at low and high temperature extremes where vegetable oil type products will fail. Applications JET-LUBE EZY-Turn:tm: #14 should be used in those applications outside the temperature range of Jet-Lube's JET-LUBE EZY-Turn:tm: #14 where a hydrocarbon resistant product is required.

JET-LUBE EZY-Turn:tm: #12

JET-LUBE EZY-Turn:tm: #12由混合植物油和聚合物的配制以确保对阀的操作降低转矩的要求,同时提供一个防漏密封。JET-LUBE EZY-Turn:tm: #12是一个理想的通用密封胶,设计为使用高压润滑器被注入到所述阀体。应用JET-LUBE EZY-Turn:tm: #12主要用于油田应用而设计的。它可以在圣诞树或线阀可以使用,并且是有效的,涉及烃的盐与水的混合物的服务,稀酸或碱,在石油和天然气生产操作中遇到的其它混合物。

JET-LUBE EZY-Turn:tm: #12 is formulated from a blend of vegetable oils and polymers to ensure reduced torque requirements for valve operation while providing a leak-proof seal. JET-LUBE EZY-Turn:tm: #12 is an ideal general purpose sealant, designed to be injected into the valve body using a high pressure lubricator.  Applications JET-LUBE EZY-Turn:tm: #12 is designed primarily for oilfield applications. It can be used on Christmas trees or line valves and is effective in services that involve mixtures of hydrocarbons with salt water, dilute acids or alkalis and other mixtures encountered in oil and gas production operations.

JET-LUBE EZY-Turn:tm: #8

JET-LUBE EZY-Turn:tm: #8包含一个混合聚四氟乙烯颗粒尺寸设计提供最大的密封力。它是适合用作可注射的干填料和作为螺纹密封剂。应用JET-LUBE EZY-Turn:tm: #8是一种理想的密封剂/润滑剂旋塞阀的应用场合磨损,擦伤或阀门泄漏遇到。地面聚四氟乙烯本产品的高比例的设计,提供最大功率的密封和润滑的问题情境。JET-LUBE EZY-Turn:tm: #8是油和防水性,可以在大多数油田,工业或海洋应用在旋塞阀的使用可以使用。它也可以在填料箱使用时,阀针和作为填料和螺纹密封剂。

JET-LUBE EZY-Turn:tm: #8 contains a blend of PTFE particle sizes designed to provide maximum sealing power. It is suitable for use as an injectable stem packing and as a thread sealant.  Applications JET-LUBE EZY-Turn:tm: #8 is an ideal sealant/lubricant for plug valve applications where a worn, scored or leaking valve is encountered. The high percentage of ground PTFE in this product is designed to provide maximum sealing power and lubrication in problem situations. JET-LUBE EZY-Turn:tm: #8 is both oil and water resistant and can be used in most oilfield, industrial or marine applications where plug valves are used. It can also be used in stuffing boxes, valve stems and as a packing and thread sealant.

CHO DÙ DỰ ÁN LỚN HAY NHỎ CHÚNG TÔI ĐỀU RẤT QUAN TÂM
Hãy chia sẻ ý kiến của bạn với chúng tôi bất cứ khi nào.